Show Dot1X Interface - Dell PowerConnect 7000 Series Reference Manual
Systems cli reference guide
Hide thumbs
Also See for PowerConnect 7000 Series:
- Stacking instructions (37 pages) ,
- Technical white paper (34 pages)
Table of Contents
Advertisement
Clients Authenticated using Dot1x.............. 1
Logical Interface.............................. 16
Interface...................................... gi1/0/2
User Name...................................... 000102030405
Supp MAC Address............................... 00:01:02:03:04:05
Session Time................................... 518
Filter Id......................................
VLAN Id........................................ 1
VLAN Assigned.................................. Default
Session Timeout................................ 0
Session Termination Action..................... Default
Logical Interface.............................. 96
Interface...................................... gi1/0/7
User Name...................................... brcm
Supp MAC Address............................... 00:08:A1:7E:45:1A
Session Time................................... 67
VLAN Id........................................ 1
VLAN Assigned.................................. Monitor Mode
Session Timeout................................ 0
Session Termination Action..................... Default
show dot1x interface
This command shows the status of MAC Authentication Bypass. This feature
is an extension of Dot1x Option 81 feature added in Power Connect Release
2.1. to accept a VLAN name as an alternative to a number when RADIUS
indicates the Tunnel-Private-Group-ID for a supplicant.
Syntax
unit/slot/port
show dot1x interface {gigabitethernet
|
unit/slot/port
tengigabitethernet
}
837
802.1x Commands
Advertisement
Table of Contents
