Dell PowerConnect 7000 Series Reference Manual page 152

power inline priority
power inline priority
enable
power inline reset
power inline usage-
threshold
clear power inline statistics Clears the PoE statistics.
show power inline
show power inline
firmware-version
a. For the meaning of each Mode abbreviation, see Mode Types on page 79.
RMON
Command
rmon alarm
rmon collection history
rmon event
show rmon alarm
show rmon alarms
show rmon collection
history
show rmon events
show rmon history
show rmon log
show rmon statistics
152
Command Groups
Configures the port priority level for the
delivery of power to an attached device.
Use this command along with the power
inline management command for power
management.
Use to reset the port.
Configures the system power usage
threshold level at which lower priority
ports are disconnected.
Reports current PoE configuration and
status.
Displays the version of the PoE controller
firmware present on the switch file system.
Description
Configures alarm conditions.
Enables a Remote Monitoring (RMON) MIB
history statistics group on an interface.
Configures an RMON event.
Displays alarm configurations.
Displays the alarms summary table.
Displays the requested group of statistics.
Displays the RMON event table.
Displays RMON Ethernet Statistics history.
Displays the RMON logging table.
Displays RMON Ethernet Statistics.
IC
(Ethernet)
GC
IC
GC
PE
PE
PE
a
Mode
GC
IC
GC
UE
UE
and
PE
UE
UE
UE
UE
UE