Clear Dhcp L2Relay Statistics Interface - Dell PowerConnect 7000 Series Reference Manual

Example
console#show dhcp l2relay remote-id vlan 200
DHCP L2 Relay is
VLAN ID
--------
200

clear dhcp l2relay statistics interface

Use the show dhcp l2relay statistics interface command in Privileged EXEC
mode to reset the DHCP L2 Relay counters to zero. Specify the port with the
counters to clear, or use the all keyword to clear the counters on all ports.
Syntax
clear dhcp l2relay statistics interface {all |
Parameter Description
Parameter
all
interface-id
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
342
DHCP Layer 2 Relay Commands
Enabled.
Remote Id
-------------
remote_22
Description
Show all interfaces.
A physical interface.
interface-id
}