Example
The following example sets at 10 seconds the interval between general queries
sent at startup for VLAN 15.
console(config)#interface vlan 15
console(config-if-vlan15)#ip igmp startup-query-
interval 10
ip igmp version
Use the ip igmp version command in Interface Configuration mode to
configure the version of IGMP for an interface.
Syntax
version
ip igmp version
version — IGMP version. (Range: 1-3)
•
Default Configuration
The default version is 3.
Command Mode
Interface Configuration (VLAN) mode
User Guidelines
This command has no user guidelines.
Example
The following example configures version 2 of IGMP for VLAN 15.
console#interface vlan 15
console(config-if-vlan15)#ip igmp version 2
show ip igmp
Use the show ip igmp command in Privileged EXEC mode to display system-
wide IGMP information.
933
IGMP Commands