Ip Pim Dense - Dell PowerConnect 7000 Series Reference Manual

ip pim dense

Use the ip pim dense command in Global Configuration mode to
administratively configure PIM dense mode for IP multicast routing. Use the
no form of this command to disable PIM dense mode. This command
replaces the ip pimsm command.
Syntax
ip pim dense
no ip pim dense
Default Configuration
PIM is not enabled by default.
Command Mode
Global Configuration mode
User Guidelines
Only one of sparse or dense mode can be configured on a router.
Example
console(config)#ip pim dense
ip pim dr-priority
The ip pim dr-priority command in Interface (VLAN) Configuration mode
to administratively configure the advertised designated router (DR) priority
value. Use the no form of this command to return the configuration to the
default.
Syntax
ip pim dr-priority
no ip pim dr-priority
priority — The administratively configured priority (Range:
•
0–2147483647).
priority
Multicast Commands
1075