Examples
console(config-linkDep-group-1)#depends-on
gigabitethernet 1/0/10
console(config-linkDep-group-1)#depends-on port-
channel 6
show link-dependency
Use the show link-dependency command to show the link dependencies
configured for a particular group. If no group is specified, then all the
configured link-dependency groups are displayed.
Syntax
show link-dependency [
Parameter Description
Parameter
GroupID
detail
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
No specific guidelines
Example
The following command shows link dependencies for all groups.
576
Link Dependency Commands
group GroupId
Description
Link dependency group identifier. (Range: Valid Group Id,
1–16)
Show detailed information about the state of members and the
dependent ports.
] [detail]