Bcast
Intf
Mode
------ ------- ------- ------- ------- ------- -------
1/0/1
Disable 5
1/0/2
Disable 5
1/0/3
Disable 5
1/0/4
Disable 5
console#show storm-control
802.3x Flow Control Mode.................... Disable
shutdown
Use the shutdown command in Interface Configuration mode to disable an
interface. To restart a disabled interface, use the no form of this command.
Syntax
shutdown
no shutdown
Default Configuration
The interface is enabled.
Command Mode
Interface Configuration (Ethernet, Port-Channel, Tunnel, Loopback) mode
User Guidelines
This command has no user guidelines.
Examples
The following example disables gigabit Ethernet port 1/0/5.
console(config)#interface gigabitethernet 1/0/5
426
Ethernet Configuration Commands
Bcast
Mcast
Level
Mode
Disable 5
Disable 5
Disable 5
Disable 5
Mcast
Ucast
Level
Mode
Disable 5
Disable 5
Disable 5
Disable 5
Ucast
Level