Dvlan-Tunnel Ethertype - Dell PowerConnect 7000 Series Reference Manual

name (VLAN
Configuration)
protocol group
protocol vlan group switchport access
protocol vlan group
all
show dvlan-tunnel switchport general

dvlan-tunnel ethertype

Use the dvlan-tunnel ethertype command in Global Configuration mode to
enable the configuration of the outer VLAN tag ethertype.
To configure the EtherType to its default value, use the no form of this
command.
Syntax
dvlan-tunnel ethertype {802.1Q | vman | custom
no dvlan-tunnel ethertype
Parameter Description
Parameter
802.1Q
vman
custom
primary-tpid
772
VLAN Commands
show vlan
association mac
show vlan
association subnet
vlan
switchport
forbidden vlan
acceptable-frame-
type tagged-only
Description
Configures the EtherType as 0x8100.
Configures the EtherType as 0x88A8
Configures a custom EtherType for the DVLAN tunnel. The
value must be 0-65535.
Globally configures the tag protocol identifier on the outer
VLAN tag (S-TAG).
switchport trunk
vlan
vlan (Global
Config)
vlan association
mac
vlan association
subnet
0-65535 [ primary-tpid ]}
vlan protocol group
name
vlan protocol group
remove
vlan routing