Match Ip6Flowlbl - Dell PowerConnect 7000 Series Reference Manual

Example
The following example displays how to add a match condition based on
ethertype.
console(config-classmap)#match ethertype arp

match ip6flowlbl

The match ip6flowlbl command adds to the specified class definition a
match condition based on the IPv6 flow label of a packet.
Syntax
match ip6flowlbl
label - The value to match in the Flow Label field of the IPv6 header
•
(Range 0-1048575).
Default Configuration
There is no default configuration for this command.
Command Mode
Ipv6-Class-Map Configuration mode.
User Guidelines
There are no user guidelines for this command.
Example
The following example adds a rule to match packets whose IPv6 Flow Label
equals 32312.
console(config-classmap)#match ip6flowlbl 32312
668
QoS Commands
label