Ip Pim Sparse - Dell PowerConnect 7000 Series Reference Manual
Systems cli reference guide
Hide thumbs
Also See for PowerConnect 7000 Series:
- Stacking instructions (37 pages) ,
- Technical white paper (34 pages)
Table of Contents
Advertisement
Syntax
ip pim rp-candidate vlan {
interval
]}
no ip pim rp-candidate vlan
Parameter Description
Parameter
vlan-id
group-address
group-mask
interval
Default Configuration
None - the router does not advertise itself as an RP candidate by default.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
console(config)#ip pimsm rp-candidate vlan 10
239.1.0.0 255.255.0.0 interval 30
ip pim sparse
Use the ip pim sparse command in Global Configuration mode to
administratively configure PIM sparse mode for IP multicast routing. Use the
no form of this command to disable PIM sparse mode. This command
replaces the ip pimsm command.
1080
Multicast Commands
vlanid group-address group-mask
vlanid group-address group-mask}
Description
A valid VLAN identifier with multicast routing enabled.
A valid multicast group address.
A mask indicating the range of multicast groups for which the
router should advertise itself as an RP-candidate.
(Optional) Indicates the RP candidate advertisement interval.
The range is from 1 to 16383 seconds. The default value is 60
seconds.
[interval
Advertisement
Table of Contents
