Default-Metric - Dell PowerConnect 7000 Series Reference Manual

Syntax Description
Parameter
always
metric-value
type-value
Default Configuration
The default metric is none and the default type is 2.
Command Mode
Router OSPF Configuration mode.
User Guidelines
This command has no user guidelines.
Example
The following example always advertises default routes.
console(config-router)#default-information originate
always metric 100 metric-type 1

default-metric

Use the default-metric command in Router OSPF Configuration mode to set
a default for the metric of distributed routes. Use the no form of the
command to remove the metric from the distributed routes. If the area has
not been previously created, it is created by this command. If the area already
exists, the default-metric information is added or modified.
Syntax
metric-value
default-metric
no default-metric
Description
Always advertise default routes.
The metric (or preference) value of the default route. (Range:
1–16777214)
External type-1 route.
1
External type-2 route.
2
OSPF Commands
1123