Dell PowerConnect 7000 Series Reference Manual page 611

Syntax
1–100
mvr querytime
no mvr querytime
Parameter Description
Parameter
querytime
Default Configuration
The default value is 5 tenths of a second.
Command Mode
Global Config
User Guidelines
The following table lists the completion messages.
Message Type
Successful Completion Message
Error Completion Message
Example
console(config)#interface Gi1/0/1
console(config-if-Gi1/0/1)#switchport access vlan 10
console(config-if-Gi1/0/1)#mvr
console(config-if-Gi1/0/1)#mvr type receiver
console(config-if-Gi1/0/1)#mvr mode dynamic
console(config-if-Gi1/0/1)#mvr querytime 10
Description
The query time is a maximum time to wait for an IGMP
membership report on a receiver port before removing the port
from the multicast group. The query time only applies to
receiver ports. The query time is specified in tenths of a second.
Multicast VLAN Registration Commands
Message Description
Defaulting MVR query response time.
None
611