Enable Authentication - Dell PowerConnect 7000 Series Reference Manual

Parameter Description
This command does not require a parameter description.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
console#clear aaa ias-users

enable authentication

Use the enable authentication command in Line Configuration mode to
specify the authentication method list when accessing a higher privilege level
from a remote telnet or console. To return to the default specified by the
enable authentication command, use the no form of this command.
Syntax
enable authentication {default |
no enable authentication
• default — Uses the default list created with the aaa authentication enable
command.
list-name — Uses the indicated list created with the aaa authentication
•
enable command. (Range: 1-12 characters)
Default Configuration
Uses the default set with the command aaa authentication enable.
248
AAA Commands
list-name
}