Ip Dhcp Snooping Binding - Dell PowerConnect 7000 Series Reference Manual

Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
console(config)#ip dhcp snooping
console(config-if-vlan1)#ip dhcp snooping

ip dhcp snooping binding

Use the ip dhcp snooping binding command to configure a static DHCP
Snooping binding. Use the "no" form of this command to remove a static
binding.
Syntax
ip dhcp snooping binding
{gigabitethernet
no ip dhcp snooping binding mac-address
Parameter Description
Parameter
mac-address
vlan-id
ip-address
interface
Default Configuration
There are no static DHCP snooping bindings by default.
356
DHCP Snooping Commands
mac-address
unit/slot/port
| tengigabitethernet
Description
The client's MAC address.
The number of the VLAN the client is authorized to use.
The IP address of the client.
The interface on which the client is authorized. The form is
unit/slot/port.
vlan-id ip-address
vlan
unit/slot/port
interface
}