Ip Dhcp Snooping Database Write-Delay - Dell PowerConnect 7000 Series Reference Manual

User Guidelines
There are no user guidelines for this command.
Example
The following example configures the storage location of the snooping
database as local.
console(config)#ip dhcp snooping database local
The following example configures the storage location of the snooping
database as remote.
console(config)#ip dhcp snooping database
tftp://10.131.11.1/db.txt

ip dhcp snooping database write-delay

Use the ip dhcp snooping database write-delay command to configure the
interval in seconds at which the DHCP Snooping database will be stored in
persistent storage. Use the "no" form of this command to reset the write delay
to the default.
Syntax
ip dhcp snooping database write-delay
no ip dhcp snooping database write-delay
Parameter Description
Parameter
seconds
Default Configuration
The write delay is 300 seconds by default.
Command Mode
Global Configuration mode
358
DHCP Snooping Commands
Description
The write delay (Range: 15–86400 seconds).
seconds