Vlan Protocol Group Remove - Dell PowerConnect 7000 Series Reference Manual

console(config)#vlan protocol group add protocol 2
ethertype 0xXXXX
vlan protocol group name
This is a new command for assigning a group name to vlan protocol group id.
Syntax
vlan protocol group name
no vlan protocol group name
groupid —The protocol-based VLAN group ID, which is automatically
•
generated when you create a protocol-based VLAN group with the vlan
protocol group command. To see the group ID associated with the name
of a protocol group, use the show port protocol all command
groupName —The group name you want to add. The group name can be
•
up to 16 characters length. It can be any valid alpha numeric characters.
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
console(config)# vlan protocol group name 1 usergroup

vlan protocol group remove

Use the vlan protocol group remove command in Global Configuration
mode to remove the protocol-based VLAN group identified by
groupid groupName
groupid
groupid
VLAN Commands
.
805