Commands In This Chapter - Dell PowerConnect 7000 Series Reference Manual

interface within a specified length of time (multicast router present
expiration time), that interface is removed from the list of interfaces with
multicast routers attached. The multicast router present expiration time is
configurable using management. The default value for the multicast router
expiration time is zero, which indicates an infinite timeout (that is, no
expiration).

Commands in this Chapter

This chapter explains the following commands:
ip igmp snooping (global)
ip igmp snooping (interface)
ip igmp snooping host-time-out
ip igmp snooping leave-time-out
ip igmp snooping mrouter-time-out
show ip igmp snooping
show ip igmp snooping groups
ip igmp snooping (global)
Use the ip igmp snooping command in Global Configuration mode to
globally enable Internet Group Management Protocol (IGMP) snooping. Use
the no form of this command to disable IGMP snooping globally.
Syntax
ip igmp snooping
no ip igmp snooping
Default Configuration
IGMP snooping is disabled.
Command Mode
Global Configuration mode
480
IGMP Snooping Commands
show ip igmp snooping interface
show ip igmp snooping mrouter
ip igmp snooping (VLAN)
ip igmp snooping fast-leave
ip igmp snooping groupmembership-
interval
ip igmp snooping maxresponse
ip igmp snooping mcrtrexpiretime