Show Mac Address-Table Dynamic - Dell PowerConnect 7000 Series Reference Manual
Systems cli reference guide
Hide thumbs
Also See for PowerConnect 7000 Series:
- Stacking instructions (37 pages) ,
- Technical white paper (34 pages)
Table of Contents
Advertisement
Parameter Description
Parameter
interface-id
vlan-id
Default Configuration
This command has no default configuration.
Command Mode
User EXEC, Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays the addresses in the Forwarding Database:
console#show mac address-table count
Capacity: 8192
Used: 109
Static addresses: 2
Secure addresses: 1
Dynamic addresses: 97
Internal addresses: 9
show mac address-table dynamic
Use the show mac address-table command in User EXEC or Privileged EXEC
mode to display all dynamic entries in the bridge-forwarding database.
Description
Specify an interface type; valid interfaces include physical ports
and port channels.
Specify a valid VLAN, the range is 1 to 4093.
Address Table Commands
303
Advertisement
Table of Contents
