Lacp Port-Priority - Dell PowerConnect 7000 Series Reference Manual

• 6 — Source/destination IP and source/destination TCP/UDP port
• 7 — Enhanced hashing mode
Default Configuration
This command has no default configuration.
Command Mode
Interface Configuration (port-channel)
User Guidelines
No specific guidelines.
Example
console(config)#interface port-channel l
console(config-if-po1)#hashing-mode 4
console(config-if-po1)#no hashing mode

lacp port-priority

Use the lacp port-priority command in Interface Configuration mode to
configure the priority value for physical ports. To reset to default priority
value, use the no form of this command.
Syntax
lacp port-priority
no lacp port-priority
value — Port priority value. (Range: 1–65535)
•
Default Configuration
The default port priority value is 1.
Command Mode
Interface Configuration (Ethernet) mode
value
Port Channel Commands
631