Show Ip Multicast - Dell PowerConnect 7000 Series Reference Manual

Forbidden addresses: 1
The following table shows the information the command displays:
Field
Capacity
Used
Static addresses The number of addresses in the multicast address table that are
Dynamic
addresses
Forbidden
addresses

show ip multicast

Use the show ip multicast command in Privileged EXEC mode to display the
system-wide multicast information.
Syntax
show ip multicast
Syntax Description
This command has no arguments or keywords.
Default Configuration
This command has no default configuration.
Command Mode
User EXEC, Privileged EXEC modes
User Guidelines
This command has no user guidelines.
1084
Multicast Commands
Description
The maximum number of addresses that can be stored in the
multicast address table.
The total number of addresses in the multicast address table.
static IP addresses.
The number of addresses in the multicast address table that were
learned dynamically.
The number of addresses in the multicast address table that are
forbidden IP addresses.