Ipv6 Pim Bsr-Candidate - Dell PowerConnect 7000 Series Reference Manual

ipv6 pim bsr-candidate

Use the ipv6 pim bsr-candidate command to configure the router to advertise
itself as a bootstrap router (BSR). Use the no form of this command to return
to the default configuration.
Syntax
ipv6 pim bsr-candidate vlan {
interval
]}
no ipv6 pim bsr-candidate vlan {
Parameter Description
Parameter
vlan-id
hash-mask-len
bsr-priority
interval
Default Configuration
None - The router does not advertise itself as an BSR candidate.
Command Mode
Global Configuration mode
User Guidelines
All multicast groups with the same hash value correspond to the same RP .
Lower priority values are preferred.
992
IPv6 PIM Commands
vlan-id hash-mask-len bsr-priority
vlan-id
Description
A valid VLAN identifier with multicast routing enabled.
The length of the BSR hash to be AND'ed with the multicast
group address. Range 0-32. Default 0.
The advertised priority of the bsr-candidate. Range: 0–255.
Default 0.
(Optional) Indicates the BSR candidate advertisement interval.
The range is from 1 to 16383 seconds. The default value is 60
seconds.
}
[interval