Ipv6 Host - Dell PowerConnect 7000 Series Reference Manual

Command Mode
Global Configuration

ipv6 host

The ipv6 host command is used to define static host name-to- ipv6 address
mapping in the host cache.
Syntax
name ipv6-address
ipv6 host
name
no ipv6 host
name — Host name.
•
ipv6-address — IPv6 address of the host.
•
Default Configuration
No IPv6 hosts are defined.
Command Mode
Global Configuration mode.
User Guidelines
This command has no user guidelines.
Example
console(config)#ipv6 host Dell 2001:DB8::/32
ipv6 mld last-member-query-count
The ipv6 mld last-member-query-count command sets the number of
listener-specific queries sent before the router assumes that there are no local
members on the interface. Use the "no" form of this command to set the last
member query count to the default.
Syntax
ipv6 mld last-member-query-count
last-member-query-count
IPv6 Routing Commands
1015