Show Classofservice Dot1P-Mapping - Dell PowerConnect 7000 Series Reference Manual
Systems cli reference guide
Hide thumbs
Also See for PowerConnect 7000 Series:
- Stacking instructions (37 pages) ,
- Technical white paper (34 pages)
Table of Contents
Advertisement
Source Layer 4 Port
show classofservice dot1p-mapping
Use the show classofservice dot1p-mapping command in Privileged EXEC
mode to display the current Dot1p (802.1p) priority mapping to internal
traffic classes for a specific interface.
Syntax
show classofservice dot1p-mapping [{gigabitethernet
port-channel-number | tengigabitethernet unit/slot/port }]
channel
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
If the interface is specified, the 802.1p mapping table of the interface is
displayed. If omitted, the most recent global configuration settings are
displayed.
Example
The following example displays the dot1p traffic class mapping and user
priorities.
console#show classofservice dot1p-mapping
User Priority
-------------
0
1
2
3
80(http/www)
Traffic Class
---------------
1
1
6
4
unit/slot/port
| port-
QoS Commands
683
Advertisement
Table of Contents
