Default Configuration
The default timer expiration period is 60 seconds.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
console(config)#ipv6 mld snooping querier timer
expiry 222
show ipv6 mld snooping querier
Use the show ipv6 mld snooping querier command to display MLD
Snooping Querier information. Configured information is displayed whether
or not MLD Snooping Querier is enabled.
Syntax
vlan-id
show ipv6 mld snooping querier [detail | vlan
]
vlan-id — A valid VLAN ID. (Range: 1 - 4093)
•
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC mode
User Guidelines
When the optional argument vlan vlan-id is not used, the command shows
the following information:
Parameter
Description
550
IPv6 MLD Snooping Querier Commands