console(config)#ip dhcp pool "Windows PCs"
console(config-dhcp-pool)#network 192.168.21.0 /24
console(config-dhcp-pool)#domain-name power-
connect.com
console(config-dhcp-pool)#dns-server 192.168.22.3
192.168.23.3
console(config-dhcp-pool)#netbios-name-server
192.168.22.2 192.168.23.2
console(config-dhcp-pool)#netbios-node-type h-node
console(config-dhcp-pool)#lease 2 12
console(config-dhcp-pool)#default-router 192.168.22.1
192.168.23.1
bootfile
Use the bootfile command in DHCP Pool Configuration mode to set the
name of the image for the DHCP client to load. Use the no form of the
command to remove the bootfile configuration. Use the show ip dhcp pool
command to display pool configuration parameters.
Syntax
filename
bootfile
no bootfile
Parameter Description
Parameter
filename
Default Configuration
There is no default bootfile filename.
Description
The name of the file for the DHCP client to load.
DHCP Server and Relay Agent Commands
867