Dhcp L2Relay Circuit-Id - Dell PowerConnect 7000 Series Reference Manual
Systems cli reference guide
Hide thumbs
Also See for PowerConnect 7000 Series:
- Stacking instructions (37 pages) ,
- Technical white paper (34 pages)
Table of Contents
Advertisement
Example
console(config-if-1/0/1)#dhcp l2relay
dhcp l2relay circuit-id
Use the dhcp l2relay circuit-id command to enable setting the DHCP
Option 82 Circuit ID for a VLAN. When enabled, the interface number is
added as the Circuit ID in DHCP option 82. Use the "no" form of this
command to disable setting the DHCP Option 82 Circuit ID.
Syntax
dhcp l2relay circuit-id vlan
no dhcp l2relay circuit-id vlan
Parameter Description
Parameter
vlan-range
Default Configuration
Setting the DHCP Option 82 Circuit ID is disabled by default.
Command Mode
Global Configuration
User Guidelines
There are no user guidelines for this command.
Example
console(config)#dhcp l2relay circuit-id vlan 340-350
vlan-range
vlan-range
Description
The list of VLAN IDs.
DHCP Layer 2 Relay Commands
331
Advertisement
Table of Contents
