Dell PowerConnect 7000 Series Reference Manual page 85

CDP Interoperability
Command
clear isdp counters
clear isdp table
isdp advertise-v2
isdp enable
isdp holdtime
isdp timer
show isdp
show isdp interface
show isdp entry
show isdp neighbors
show isdp traffic
a. For the meaning of each Mode abbreviation, see Mode Types on page 79.
DHCP L2 Relay
Command
dhcp l2relay
dhcp l2relay circuit-id
dhcp l2relay remote-id
Description
Clears the ISDP counters.
Clears entries in the ISDP table.
Enables the sending of ISDP version 2 packets
from the device.
Enables ISDP on the switch.
Configures the hold time for ISDP packets that
the switch transmits.
Sets period of time between sending new ISDP
packets.
Displays global ISDP settings.
Displays ISDP settings for the specified
interface.
Displays ISDP entries.
Displays the list of neighboring devices.
Displays ISDP statistics.
Description
Enables the Layer 2 DHCP Relay agent for an
interface or globally.
Enables user to set the DHCP Option 82
Circuit ID for a VLAN.
Enables user to set the DHCP Option 82
Remote ID for a VLAN.
Command Groups
a
Mode
PE
PE
GC
GC or
IC
GC
GC
PE
PE
PE
PE
PE
a
Mode
GC or
IC
GC
GC
85