Prerequisites For Ipmi Port Configuration; Configuring The Ipmi Port - VERITAS Velocity 7330 Hardware Installation Manual

Prerequisites for IPMI port configuration

Configuring the IPMI port

Verify the following configuration prerequisites:
Ensure that you have a dedicated network infrastructure. The remote
■
management port can auto-negotiate its link speed up to 1 Gbps.
Note: If the IPMI is connected to a managed switch port, you should configure
the switch port to auto-negotiation.
The remote management port must be configured as a DHCP or static address.
■
If a firewall exists between the appliance and the remote devices that manage
■
the appliance (like a laptop computer), open the following ports:
22 SSH
80 HTTP
162 SNMP
443 HTTPS
623 KVM
5120 RMM ISO/CD
5123 RMM floppy
5124 CD
5127 SSL
5900 KVM CLI
7578 RMM CLI
7582 SSL
Note: If you have a private internal network, remember to configure the settings
accordingly in your network address translation (NAT).
Gather the following information from your network administrator:
Veritas Remote Management (IPMI) configuration
Prerequisites for IPMI port configuration
52