Domain Auto-Reconfigure Enable - HP 5920 Series Command Reference Manual

Usage guidelines
If you do not specify the distributed-services, error-detect, or resource-allocation keyword, this
command displays all the fabric timers.
Examples
# Display all the fabric timers for VSAN 1.
<Sysname> display fc timer vsan 1
Timer of VSAN 1:
Distributed-services timer: 5000 ms
Error-detect timer:
Resource-allocation timer:

domain auto-reconfigure enable

Use domain auto-reconfigure enable to enable automatic reconfiguration in a VSAN.
Use undo domain auto-reconfigure enable to disable automatic reconfiguration in a VSAN .
Syntax
domain auto-reconfigure enable
undo domain auto-reconfigure enable
Default
Automatic reconfiguration is disabled in each VSAN.
Views
VSAN view
Predefined user roles
network-admin
Usage guidelines
This command takes effect only when the fabric configuration function is enabled.
A fabric reconfiguration triggers a principal switch selection phase.
A disruptive reconfiguration is automatically performed if the domain ID lists overlap when two fabrics
are merged.
A nondisruptive reconfiguration is automatically performed when one of the following conditions exists:
When two fabrics are merged, the principal switch information of the two fabrics is different, and
•
the domain ID lists are not empty and do not overlap.
A principal link in a fabric goes down.
•
Examples
# Enable the automatic reconfiguration function in VSAN 1.
<Sysname> system-view
[Sysname] vsan 1
[Sysname-vsan1] domain auto-reconfigure enable
Related commands
domain configure enable
2000 ms
10000 ms
60