Bind Interface - HP 5920 Series Command Reference Manual

Views
VFC interface view
Predefined user roles
network-admin
Parameters
bandwidth-value: Specifies the expected bandwidth in the range of 1 to 400000000 kbps.
Usage guidelines
The expected bandwidth determines the cost of the interface, which is used for route calculation.
By default, the baud rate of a VFC interface is 10 Gbps.
Examples
# Set the expected bandwidth of interface VFC 1 to 50 kbps.
<Sysname> system-view
[Sysname] interface vfc 1
[Sysname-Vfc1] bandwidth 50

bind interface

Use bind interface to bind a VFC interface to an Ethernet interface.
Use undo bind interface to remove a VFC-to-Ethernet interface binding.
Syntax
bind interface interface-type interface-number [ mac mac-address ]
undo bind interface
Default
A VFC interface is not bound to any Ethernet interface.
Views
VFC interface view
Predefined user roles
network-admin
Parameters
interface-type interface-number: Specifies an interface by its type and number. The interface type can be
one of the following:
Layer 2 Ethernet interface.
•
Layer 2 aggregate interface.
•
S-channel interface.
•
S-channel aggregate interface.
•
mac mac-address: Specifies the bound peer FCoE MAC address, in the format of XXXX-XXXX-XXXX and
six bytes in length.
18