Display Fc Switch-Wwn; Display Fc Timer - HP 5920 Series Command Reference Manual

Field
REGISTERED FOR
Total entries

display fc switch-wwn

Use display fc switch-wwn to display the WWN of the local switch.
Syntax
display fc switch-wwn
Views
Any view
Predefined user roles
network-admin
network-operator
Examples
# Display the WWN of the local switch.
<Sysname> display fc switch-wwn
Switch WWN is 10:00:00:0d:ec:ff:a3:25

display fc timer

Use display fc timer to display fabric timers.
Syntax
display fc timer [ distributed-services | error-detect | resource-allocation ] [ vsan vsan-id ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
distributed-services: Displays the distributed service timeout period, in milliseconds.
error-detect: Displays the error detection timeout period, in milliseconds.
resource-allocation: Displays the resource allocation timeout period, in milliseconds.
vsan vsan-id: Specifies a VSAN by its ID in the range of 1 to 3839. If you do not specify a VSAN, this
command displays global fabric timer information.
Description
Type of Registered State Change Notification (RSCN) messages:
•
fabric detected rscns—Accepts all RSCN messages sent by the switches in the
fabric.
•
nx_port detected rscns—Accepts all RSCN messages sent by N_Ports.
•
full detected rscns—Accepts all RSCN messages.
Number of SCR entries in the VSAN.
59