Fc Mode (Fc Aggregate Interface View) - HP 5920 Series Command Reference Manual

Match criteria
Mode
Speed
Selected

fc mode (FC aggregate interface view)

Use fc mode to configure the mode of an FC aggregate interface.
Use undo fc mode to restore the default.
Syntax
fc mode { auto | e | f | np }
undo fc mode
Default
On an FCF switch, the mode of an FC aggregate interface is auto.
On an NPV switch, the mode of an FC aggregate interface is F.
Views
FC aggregate interface view
Predefined user roles
network-admin
Parameters
auto: Specifies the auto mode, so that the FC aggregate interface can operate in F mode or E mode
through dynamic negotiation.
e: Specifies the E mode.
f: Specifies the F mode.
np: Specifies the NP mode.
Usage guidelines
An FCF switch supports E, F, and auto modes. An NPV switch supports F and NP modes.
Examples
# Configure the mode of FC aggregate interface 3 as E.
<Sysname> system-view
[Sysname] interface san-aggregation 3
Description
Operating mode of the member interface:
•
E—E mode.
•
F—F mode.
•
NP—NP mode.
When the member interface is down at the link layer, a hyphen (-) is displayed for
this field.
Speed of the member interface. When the member interface is down at the link
layer, a hyphen (-) is displayed for this field.
Selected state of the member interface:
•
N—Unselected.
•
Y—Selected.
35