Fc Timer Distributed-Services - HP 5920 Series Command Reference Manual

Use undo fc name-service auto-discovery to disable SCSI-FCP information autodiscovery.
Syntax
fc name-service auto-discovery
undo fc name-service auto-discovery
Default
Auto discovery of SCSI-FCP information is enabled.
Views
VSAN view
Predefined user roles
network-admin
Usage guidelines
In some situations, for example, when a node logs out and then logs back in, the node does not register
SCSI-FCP support. Therefore, the node does not have a Feature value. This might cause communication
failure between the node and other nodes.
This feature enables the switch to automatically obtain SCSI-FCP support and the Feature value by
sending a PRLI packet to the node that is logging in. Then, the switch stores the SCSI-FCP information in
the name service database.
NOTE:
After this feature is enabled, nodes with older-model HBAs might not actively register name service
information with the switch.
Examples
# Enable SCSI-FCP information autodiscovery in VSAN 2.
<Sysname> system-view
[Sysname] vsan 2
[Sysname-vsan2] fc name-server auto-discovery

fc timer distributed-services

Use fc timer distributed-services to specify the global distributed service timeout period.
Use undo fc timer distributed-services to restore the default.
Syntax
fc timer distributed-services value
undo fc timer distributed-services
Default
The global distributed service timeout period is 5000 milliseconds.
Views
System view
Predefined user roles
network-admin
65