Fspf Silent - HP 5920 Series Command Reference Manual

Parameters
value: Specifies the LSR retransmission interval of the interface in seconds, in the range of 1 to 65535.
vsan vsan-id: Specifies the VSAN to which the interface belongs, in the range of 1 to 3839.
Usage guidelines
The LSR retransmission interval specifies the time to wait for an LSR acknowledgment from the neighbor
before retransmitting the LSR.
Examples
# Configure the LSR retransmission interval for interface FC 1/0/1 in VSAN 4 as 10 seconds.
<Sysname> system-view
[Sysname] interface fc 1/0/1
[Sysname-Fc1/0/1] fspf retransmit-interval 10 vsan 4
# Configure the LSR retransmission interval for interface VFC 1 in VSAN 4 as 10 seconds.
<Sysname> system-view
[Sysname] interface vfc 1
[Sysname-Vfc1] fspf retransmit-interval 10 vsan 4

fspf silent

Use fspf silent to disable FSPF for the interface in a VSAN.
Use undo fspf silent to enable FSPF for the interface in a VSAN.
Syntax
fspf silent vsan vsan-id
undo fspf silent vsan vsan-id
Default
FSPF is enabled on all interfaces.
Views
FC interface view, VFC interface view, FC aggregate interface view
Predefined user roles
network-admin
Parameters
vsan vsan-id: Specifies the VSAN to which the interface belongs, in the range of 1 to 3839.
Usage guidelines
With FSPF enabled, an interface can participate in the SPF calculation. To avoid SPF calculations on an
interface, disable FSPF on the interface.
Examples
# Disable FSPF for interface FC 1/0/1 in VSAN 4.
<Sysname> system-view
[Sysname] interface fc 1/0/1
[Sysname-Fc1/0/1] fspf silent vsan 4
# Disable FSPF for interface VFC 1 in VSAN 4.
95