Zoneset Name - HP 5920 Series Command Reference Manual

Predefined user roles
network-admin
Usage guidelines
Complete distribution (or merge) distributes (or merges) both the active zone set and zone database.
Incomplete distribution (or merge) distributes (or merges) only the active zone set.
This command can be configured only in basic zoning mode. In enhanced zoning mode, the zone
distribution and merge type is always complete, and this command is not supported.
The configured distribution type applies to distribution operations triggered by the zoneset activate
command instead of the zoneset distribute command.
The configured merge type applies to all merge operations.
Examples
# Configure the zone distribution and merge type as complete.
<Sysname> system-view
[Sysname] vsan 1
[Sysname-vsan1] zoneset distribute full
Related commands
display zone status
•
zoneset activate
•

zoneset name

Use zoneset name to create a zone set and enter its view. If the zone set has been created, this command
leads you to the zone set view directly.
Use undo zoneset name to delete a zone set.
Syntax
zoneset name zoneset-name
undo zoneset name zoneset-name
Views
VSAN view
Predefined user roles
network-admin
Parameters
zoneset-name: Specifies the zone set name, a case-sensitive string of 1 to 64 characters. A zone set
name can contain letters (uppercase and lowercase), numbers, and special characters (see
must start with a letter.
Examples
# Create a zone set named zs1 and enter its view.
<Sysname> system-view
[Sysname] vsan 1
[Sysname-vsan1] zoneset name zs1
[Sysname-vsan1-zoneset-zs1]
124
Table 29). It