[Sysname-SAN-Aggregation3] fc mode e
interface san-aggregation
Use interface san-aggregation to create an FC aggregate interface and enter its view. If the FC
aggregate interface already exists, this command leads you to the FC aggregate interface view directly.
Syntax
interface san-aggregation interface-number
undo interface san-aggregation interface-number
Default
No FC aggregate interfaces exist.
Views
System view
Predefined user roles
network-admin
Parameters
interface-number: Specifies the number of the FC aggregate interface. The value range for this argument
is 1 to 1024.
Examples
# Enter the view of FC aggregate interface 3.
<Sysname> system-view
[Sysname] interface san-aggregation 3
[Sysname-SAN-Aggregation3]
Related commands
display interface san-aggregation
reset counters interface
Use reset counters interface to clear statistics for FC aggregate interfaces.
Syntax
reset counters interface [ san-aggregation [ number ] ]
Views
User view
Predefined user roles
network-admin
Parameters
number: Specifies an FC aggregate interface by its number. The value range for this argument is 1 to
1024.
Usage guidelines
Use this command to clear history statistics if you want to collect traffic statistics for a specific time period.
36