Display Fip-Snooping Rules - HP 5920 Series Command Reference Manual

Parameters
enode: Displays the ENode FIP snooping rules that are being flushed.
fcf: Displays the FCF FIP snooping rules that are being flushed.
vlan vlan-id: Specifies a VLAN by its ID in the range of 1 to 4094. If you do not specify a VLAN, this
command displays the FIP snooping rules that are being flushed for all VLANs.
Usage guidelines
Only the FIP snooping rules that have been flushed can filter FCoE frames. FIP snooping rules that are
being flushed cannot filter FCoE frames.
If you do not specify either enode or fcf, this command displays both ENode and FCF FIP snooping rules
that are being flushed.
Examples
# Display the FIP snooping rules that are being flushed.
<Sysname> display fip-snooping flushing-rules
VLAN 2:
FCF flushing-rules information:
Interface
XGE1/0/1
ENode flushing-rules information:
Interface
XGE1/0/2
VLAN 5:
FCF flushing-rules information:
Interface
XGE1/0/3
Table 42 Command output
Field
Interface
Related commands

display fip-snooping rules

display fip-snooping rules
Use display fip-snooping rules to display the FIP snooping rules that have been flushed.
Syntax
display fip-snooping rules [ enode | fcf ] [ vlan vlan-id ] [ slot slot-number ]
Views
Any view
Predefined user roles
network-admin
Source MAC/Mask
0000-1234-0212/48
Source MAC/Mask
0efc-0034-0202/48
Source MAC/Mask
0000-1234-2212/48
Description
Ethernet interface on the Transit switch.
Destination MAC/Mask
0efc-0034-0111/24
Destination MAC/Mask
0000-1234-0101/48
Destination MAC/Mask
0efc-0034-2111/24
134