HP 5920 Series Command Reference Manual page 104

Predefined user roles
network-admin
network-operator
Parameters
name zone-name: Specifies a zone by its name, a case-sensitive string of 1 to 64 characters. The name
can contain letters (uppercase and lowercase), numbers, and special characters (see
start with a letter.
Table 29 Special characters
Field
Caret
Dollar sign
Minus sign
Underscore
vsan vsan-id: Specifies a VSAN by its ID in the range of 1 to 3839.
Usage guidelines
If you specify both a zone and a VSAN, this command displays information about the specified zone in
the specified VSAN.
If you specify only a VSAN, this command displays information about all zones in the specified VSAN.
If you do not specify a zone or a VSAN, this command displays information about all zones in all
VSANs.
Examples
# Display information about all zones in all VSANs.
<Sysname> display zone
VSAN 1:
zone name z1
fcid 0x111111 initiator
fcid 0x222222 target
pwwn 11:11:11:11:22:22:22:22
fwwn 02:0e:30:30:33:33:32:35
zone name z2
fcid 0x111111
zone-alias name za1
fcid 0x333333 initiator
VSAN 2:
VSAN 3:
Table 30 Command output
Field
fcid
pwwn
fwwn
Description
^
$
-
_
Description
FC address of the zone member.
pWWN of the zone member.
fWWN of the zone member.
98
Table 29). It must