Display San-Aggregation - HP 5920 Series Command Reference Manual

Interface
SAGG1
SAGG2
# Display information about the FC aggregate interfaces in physically down state and the causes.
<Sysname> display interface san-aggregation brief down
Brief information on interface(s) under bridge mode:
Link: ADM - administratively down; Stby - standby
Interface
SAGG3
Table 9 Command output
Field
Brief information on interface(s)
under bridge mode
Link: ADM - administratively
down; Stby - standby
Interface
Link
Cause

display san-aggregation

Use display san-aggregation to display information about FC aggregation groups corresponding to
existing FC aggregate interfaces.
Syntax
display san-aggregation [ verbose ] [ interface san-aggregation interface-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Description
SAN-Aggregation1 Interface
SAN-Aggregation2 Interface
Link Cause
ADM Administratively
Description
Brief information about Layer 2 FC aggregate interfaces.
•
•
Interface name.
Physical link state of the FC aggregate interface:
•
•
•
•
Causes for the physical state of the FC aggregate interface to be Down:
•
•
ADM—The interface has been shut down by the network administrator.
To bring up the interface, execute the undo shutdown command.
Stby—The interface is a standby interface.
UP—The interface is physically up.
DOWN—The interface is physically down.
ADM—The interface has been administratively shut down. To bring up
the interface, execute the undo shutdown command.
Stby—The interface is a standby interface.
Not connected—No physical connection exists (possibly because the
network cable is disconnected or faulty).
Administratively—The port was shut down by using the shutdown
command. To bring up the interface, use the undo shutdown
command.
32