<Sysname> system-view
[Sysname] interface vfc 4
[Sysname-Vfc4] bind interface ten-gigabitethernet 1/0/1 mac 000c-2999-eacd
# Bind interface VFC 5 to interface Bridge-aggregation 1 and FCoE MAC address 000c-2888-eacd.
<Sysname> system-view
[Sysname] interface vfc 5
[Sysname-Vfc5] bind interface bridge-aggregation 1 mac 000c-2888-eacd
# Bind interface VFC 6 to interface S-Channel 1/0/1:10 and FCoE MAC address 000c-2999-eacd.
<Sysname> system-view
[Sysname]interface vfc 6
[Sysname-Vfc6] bind interface s-channel 1/0/1:10 mac 000c-2999-eacd
# Bind interface VFC 7 to interface Schannel-Aggregation 1:10 and FCoE MAC address
000c-2666-eacd.
<Sysname> system-view
[Sysname]interface vfc 7
[Sysname-Vfc7] bind interface schannel-aggregation 1:10 mac 000c-2666-eacd
Related commands
•
display fcoe
display interface vfc
•
default
Use default to restore the default settings for a VFC interface.
Syntax
default
Views
VFC interface view
Predefined user roles
network-admin
Usage guidelines
CAUTION:
The default command might interrupt ongoing network services. Make sure you are fully aware of the
impacts of this command when you execute it on a live network.
This command might fail to restore the default settings for some commands for reasons such as command
dependencies or system restrictions. Use the display this command in interface view to identify these
commands. Then use their undo forms or follow the command reference to restore their default settings.
If your restoration attempt still fails, follow the error message instructions to resolve the problem.
Examples
# Restore the default settings for interface VFC 1.
<Sysname> system-view
[Sysname] interface vfc 1
[Sysname-Vfc1] default
20