HP 5920 Series Command Reference Manual page 116

Views
Zone alias view
Predefined user roles
network-admin
Parameters
fcid fcid: Specifies a member by its FC address, in the format of xxxxxx, where x is a hexadecimal
number.
fwwn fwwn: Specifies a member F_Port by its fWWN, in the format of xx:xx:xx:xx:xx:xx:xx:xx, where
x is a hexadecimal number. Adding an F_Port to a zone alias adds all N_Ports that log in through the
F_Port to that zone alias.
pwwn pwwn: Specifies a member by its pWWN, in the format of xx:xx:xx:xx:xx:xx:xx:xx, where x is a
hexadecimal number.
initiator: Specifies a member as an initiator. If you do not specify the initiator or target keyword, the
member acts as both an initiator and a target.
target: Specifies a member as a target. If you do not specify the initiator or target keyword, the member
acts as both an initiator and a target.
Usage guidelines
You can also use this command to change the role of a member.
If the role of a member is specified by using the same identifier (FC address, pWWN, fWWN, or zone
alias) multiple times, the role of the member is the role most recently specified.
If the role of a member is specified by using different identifiers multiple times, the role of the member is
the union of the specified roles. For example, if a member is specified as an initiator by using its FC
address and specified as a target by using its pWWN, the member acts as both an initiator and a target.
The role of a member can be configured only in enhanced zoning mode and takes effect only when the
Pairwise feature is enabled.
Examples
# Create a zone alias named za1 and enter its view.
<Sysname> system-view
[Sysname] vsan 1
[Sysname-vsan1] zone-alias name za1
[Sysname-vsan1-zone-alias-za1]
# Add an N_Port with FC address 010000 to zone alias za1 as an initiator.
[Sysname-vsan1-zone-alias-za1] member fcid 010000 initiator
# Add an N_Port with pWWN 01:02:03:04:05:06:07:08 to zone alias za1 as a target.
[Sysname-vsan1-zone-alias-za1] member pwwn 01:02:03:04:05:06:07:08 target
# Add an F_Port with fWWN 08:07:06:05:04:03:02:01 to zone alias za1 as both an initiator and a
target.
[Sysname-vsan2-zone-alias-za1] member fwwn 08:07:06:05:04:03:02:01
Related commands
display zone-alias
•
zone-alias name
•
110