Domain Default Enable - HP 3600 v2 Series Command Reference Manual

Parameters
isp-name: ISP domain name, a case-insensitive string of 1 to 24 characters that contains no forward slash
(/), backward slash (\), colon (:), asterisk (*), question mark (?), less-than sign (<), greater-than sign (>),
vertical bar (|), quotation mark ("), or the @ sign.
Description
Use the domain isp-name command to create an ISP domain and enter ISP domain view.
Use the undo domain command to remove an ISP domain.
By default, there is a system predefined ISP domain named system in the system.
All ISP domains are in active state when they are created.
The system predefined ISP domain system cannot be deleted; you can only modify its configuration.
NOTE:
To delete the ISP domain that is used as the default ISP domain, you must change it to a non-default ISP
domain first by using the undo domain default enable command.
Related commands: state and display domain.
Examples
# Create ISP domain test, and enter ISP domain view.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test]

domain default enable

Syntax
domain default enable isp-name
undo domain default enable
View
System view
Default level
3: Manage level
Parameters
isp-name: Name of the ISP domain, a case-insensitive string of 1 to 24 characters.
Description
Use the domain default enable command to specify the default ISP domain. Users without any domain
name carried in the usernames are considered to be in the default domain.
Use the undo domain default enable command to restore the default.
By default, the default ISP domain is the system predefined ISP domain system.
There can be only one default ISP domain.
The specified domain must already exist; otherwise, users without any domain name carried in the
username cannot pass authentication.
22