Display Npv Login - HP 5920 Series Command Reference Manual

Field
Peer management address

display npv login

Use display npv login to display the nodes on downlink interfaces and their mapped uplink interfaces.
Syntax
display npv login [ vsan vsan-id ] [ interface interface-type interface-number ]
display npv login [ vsan vsan-id ] count
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
vsan vsan-id: Specifies a VSAN by its ID in the range of 1 to 3839. If you do not specify a VSAN, this
command displays information for all VSANs on the NPV switch.
interface interface-type interface-number: Specifies a downlink interface by its type and number. If you
do not specify a downlink interface, this command displays information for all downlink interfaces on the
NPV switch.
count: Displays the total number of logged-in nodes on the NPV switch.
Usage guidelines
This command is available only on switches operating in NPV mode.
Examples
# Display the nodes on downlink interfaces and their mapped uplink interfaces on the NPV switch.
<Sysname> display npv login
Server
Interface VSAN FCID
Fc1/0/2
Vfc3
# Display the number of logged-in nodes for VSAN 1 on the NPV switch.
<Sysname> display npv login vsan 1 count
Total entries: 2
# Display the number of logged-in nodes for each VSAN and the total number of logged-in nodes on the
NPV switch.
<Sysname> display npv login count
VSAN
Description
List of management addresses obtained by the NP_Port from the FCF switch.
For example, snmp://192.168.6.151 indicates that SNMP is used as the
management protocol and the management address is 192.168.6.151.
If the FCF switch is not configured with management addresses, this field is
blank.
Node WWN
1 0xae0002 20:00:00:23:89:c9:fc:05 10:00:00:23:89:c9:fc:05 Fc1/0/1
1 0xae0003 20:00:00:00:c9:66:6b:60 10:00:00:00:c9:66:6b:60 Fc1/0/1
Entries
Port WWN
127
External
Interface