HP 5920 Series Command Reference Manual page 28

Hide thumbs Also See for 5920 Series:
Table of Contents

Advertisement

Parameters
interface-number: Specifies a VFC interface by its number in the range of 1 to 1024.
brief: Displays brief information about interfaces. If you do not specify this keyword, the command
displays detailed information about interfaces.
description: Displays complete interface descriptions.
down: Displays information about the interfaces in physically down state and the causes. If you do not
specify this keyword, the command displays information about interfaces in all states.
Usage guidelines
If you do not specify the vfc keyword, this command displays information about all interfaces supported
by the switch.
If you specify the vfc keyword, this command displays information about all VFC interfaces.
If you specify a VFC interface, this command displays information about the specified VFC interface.
Examples
# Display detailed information about interface VFC 1.
<Sysname> display interface vfc 1
Vfc1
Current state: UP
Line protocol state: UP
Description: Vfc1 Interface
Bandwidth: 10000000kbps
Maximum Transmit Unit: 2112
Internet protocol processing: disabled
Link layer protocol is FC
Port WWN is 66:66:66:63:66:64:61:30
FC mode is E, state is E
Support the VSAN protocol
VSAN tagging mode is Tagging
EVFP common VSAN: 1
Bound interface is Ten-GigabitEthernet1/0/1, Bound MAC is 000c-2933-eacd
VSAN of physical-UP state: 1
Last clearing of counters: Never
Table 4 Command output
Field
Current state
Line protocol state
Bandwidth
Internet protocol processing
Description
Physical state and administrative state of the VFC interface:
DOWN (Administratively)—The interface is administratively
shut down by using the shutdown command.
DOWN—The interface is administratively up but physically
down.
UP—The interface is up both administratively and physically.
Link layer protocol state of the VFC interface: DOWN or UP.
Expected bandwidth of the VFC interface.
IP packet processing capability. If the VFC interface is not
configured with an IP address, this field displays disabled.
22

Advertisement

Table of Contents
loading

This manual is also suitable for:

5900 seriesFlexfabric 5930 series

Table of Contents