Display Fc Domain - HP 5920 Series Command Reference Manual

Views
VSAN view
Predefined user roles
network-admin
Parameters
domain-id-list: Specifies a space-separated list of up to 8 domain items. Each item specifies a domain ID
or a range of domain IDs in the form of domain-id1 to domain-id2. The value for domain-id2 must be
greater than or equal to the value for domain-id1. The value range for the domain-id argument is 1 to
239.
Usage guidelines
Each FC switch is assigned a domain ID. You can configure an allowed domain ID list.
To successfully configure an allowed domain ID list on the principal switch, make sure all assigned and
locally configured domain IDs are included in the list. After you configure an allowed domain ID list, the
principal switch assigns only domain IDs available in the allowed list.
To successfully configure an allowed domain ID list on a non-principal switch, make sure the runtime
domain ID of the switch is included in the allowed list. After you configure an allowed domain ID list on
a non-principal switch, the following rules apply:
• The locally configured domain ID must be included in the allowed list. Otherwise, the domain ID
configuration fails.
The principal switch must assign a domain ID that is included in the allowed list of the non-principal
•
switch. Otherwise, the non-principal switch refuses the assigned domain ID and isolates its interface
connected to the principal switch.
HP recommends that you configure the same allowed domain ID list for all switches in a VSAN.
Examples
# Configure VSAN 1 to allow domains 3 through 10.
<Sysname> system-view
[Sysname] vsan 1
[Sysname-vsan1] allowed-domain-id 3 to 10

display fc domain

Use display fc domain to display the domain information of a VSAN.
Syntax
display fc domain [ vsan vsan-id ]
Views
Any view
Predefined user roles
network-admin
network-operator
50