HP 5920 Series Command Reference Manual page 15

Field
aborts
ignored
parity errors
Output (total): 139 packets,
13748 bytes
139 unicasts, 0
broadcasts, 0 multicasts, 0
pauses
Output (normal): 139 packets, -
bytes
139 unicasts, 0
broadcasts, 0 multicasts, 0 pauses
output errors
underruns
buffer failures
Description
Total number of illegal incoming frames:
•
Fragment frames—CRC error frames shorter than 64 bytes. The length
(in bytes) can be an integral or non-integral value.
•
Jabber frames—CRC error frames larger than the maximum frame
allowed size on the FC interface (with an integral or non-integral
length).
For an FC interface that does not permit jumbo frames, the
maximum allowed frame size is 1518 bytes (without VLAN tags) or
1522 bytes (with VLAN tags).
For an FC interface that permits jumbo frames, the maximum
allowed frame size is configured when you configure jumbo frame
support on the interface.
•
Symbol error frames—Frames that contained at least one undefined
symbol.
•
Unknown operation code frames—Non-pause MAC control frames.
•
Length error frames—Frames whose 802.3 length fields did not match
the actual frame length (46 to 1500 bytes).
Number of incoming frames dropped because the receiving buffer of the
port ran low.
Number of incoming frames with parity errors.
Total numbers of frames and bytes sent on the FC interface, including
normal frames, error frames, and pause frames.
•
unicasts—Number of frames sent that are destined to unicast
addresses.
•
broadcasts—Number of frames sent that are destined to broadcast
addresses.
•
multicasts—Number of frames sent that are destined to multicast
addresses.
•
pauses—Number of pause frames sent.
A hyphen (-) indicates that a statistics item is not supported.
Total number of normal frames sent on the FC interface and total number
of bytes of these frames, including normal frames and pause frames.
•
unicasts—Number of normal frames sent that are destined to unicast
addresses.
•
broadcasts—Number of normal frames sent that are destined to
broadcast addresses.
•
multicasts—Number of normal frames sent that are destined to
multicast addresses.
•
pauses—Number of pause frames sent.
A hyphen (-) indicates that a statistics item is not supported.
Total number of error frames sent on the FC interface.
Number of outgoing frames dropped because the output rate of the FC
interface exceeded the queuing capability. This is a low-probability
hardware anomaly.
Number of frames dropped due to insufficient transmitting buffer
resources.
9