Fcoe Global Fcf-Priority - HP 5920 Series Command Reference Manual

Recommended
value
60–90 seconds
300–600
seconds
Examples
# Configure the FKA advertisement interval as 20 seconds.
<Sysname> system-view
[Sysname] fcoe fka-adv-period 20

fcoe global fcf-priority

Use fcoe global fcf-priority to configure the system FCF priority.
Use undo fcoe global fcf-priority to restore the default.
Syntax
fcoe global fcf-priority priority
undo fcoe global fcf-priority
Default
The system FCF priority is 128.
Views
System view
Predefined user roles
network-admin
Parameters
priority: Specifies the system FCF priority in the range of 0 to 255. The smaller the value, the higher the
priority.
Usage guidelines
The system FCF priority is used in the fcf priority field in an unsolicited Discovery Advertisement.
An ENode selects the FCF switch with the highest priority from the FCF switches sending Discovery
Advertisements and sends a FLOGI request to it for login.
This command takes effect on all VFC interfaces operating in F mode.
Application scenarios
Active/standby switchover on
the switch takes more than 2.5 x
60 seconds because of the
amount of FCoE configuration.
ISSU reboot on an IRF member
switch with subordinate
switches takes more than 2.5 x
60 seconds because of the
amount of FCoE configuration.
ISSU reboot on a switch
operating in standalone mode
or in IRF mode but without
subordinate switches and
connecting to no nodes.
Remarks
For more information about ISSU, see Fundamentals
Configuration Guide.
During an ISSU reboot on a switch operating in
standalone mode or in IRF mode but without subordinate
switches, the switch cannot send unsolicited Discovery
Advertisements or keepalive frames.
44