HP 5920 Series Command Reference Manual page 39

Parameters
verbose: Displays detailed information about FC aggregation groups. If you do not specify this keyword,
the command displays brief information about the FC aggregation groups.
interface san-aggregation interface-number: Specifies an FC aggregate interface by its number. The
value range for the interface-number argument is 1 to 1024. If you do not specify an FC aggregate
interface, this command displays information about all FC aggregation groups corresponding to existing
FC aggregate interfaces.
Examples
# Display brief information about all FC aggregation groups corresponding to existing FC aggregate
interfaces.
<Sysname> display san-aggregation
* indicates the member port is selected.
Interface
SAGG1
SAGG2
Table 10 Command output
Match criteria
Interface
State
Mode
Speed
Member port
# Display detailed information about all FC aggregation groups corresponding to existing FC aggregate
interfaces.
<Sysname> display san-aggregation verbose
Interface SAN-Aggregation1:
State
Mode
Speed
Member port number
State Mode Speed
UP E 8Gbps
DOWN - -
Description
Abbreviated FC aggregate interface name.
Physical state of the FC aggregate interface:
•
DOWN—The physical state of the interface is down and the FC aggregate
interface contains no Selected member interface.
•
UP—The physical state of the interface is up and the FC aggregate interface
contains Selected member interfaces.
Operating mode of the FC aggregate interface:
•
E—E mode.
•
F—F mode.
•
NP—NP mode.
When the physical state of the FC aggregate interface is down, a hyphen (-) is
displayed for this field.
Speed of the FC aggregate interface. It is the sum of the speed of each Selected
member interface. When the physical state of the FC aggregate interface is down,
a hyphen (-) is displayed for this field.
Member interfaces of the FC aggregation group corresponding to the FC
aggregate interface. A member interface marked with an asterisk (*) is a Selected
member interface. When the FC aggregation group does not contain any member
interface, a hyphen (-) is displayed for this field.
: UP
: E
: 2Gbps
: 2
Member port
*Fc1/0/1
Fc1/0/2
-
33