Zone Mode Enhanced - HP 5920 Series Command Reference Manual

Examples
# Configure the merge control mode as Restrict for VSAN 2.
<Sysname>system-view
[Sysname] vsan 2
[Sysname-vsan2] zone merge-control restrict
# Configure the merge control mode as Allow for VSAN 2.
[Sysname-vsan2] undo zone merge-control restrict
Related commands

zone mode enhanced

•
zoneset activate
•
zoneset distribute
•
zone mode enhanced
Use zone mode enhanced to enable the enhanced zoning mode in a VSAN.
Use undo zone mode enhanced to restore the default.
Syntax
zone mode enhanced
undo zone mode enhanced
Default
The basic zoning mode is enabled in a VSAN.
Views
VSAN view
Predefined user roles
network-admin
Usage guidelines
A zoning mode switchover causes a zone distribution to ensure zoning mode consistency across the
fabric. You can enable the enhanced zoning mode only when all switches in the fabric support this
mode.
After you switch one zoning mode to the other, the switch distributes the change to the entire fabric. If the
distribution fails, the system prints a log message, and the change takes effect only on the local switch.
You must manually trigger a complete distribution to ensure zoning mode consistency across the fabric.
If the size of the active zone set exceeds the system limit in basic zoning mode, enhanced zoning cannot
switch to basic zoning.
Examples
# Enable the enhanced zoning mode in VSAN 2.
<Sysname>system-view
[Sysname] vsan 2
[Sysname-vsan2] zone mode enhanced
The zoning database in this switch would be distributed throughout the fabric. Continue?
[Y/N]:y
117