Installation And Removal Procedure (Common Section); Removal Of Top Cover - NEC Express5800 Series User Manual
Hide thumbs
Also See for Express5800 Series:
- User manual (574 pages) ,
- Maintenance manual (238 pages) ,
- Installation manual (75 pages)
Table of Contents
Advertisement
Chapter 2 Preparations
1.4
Installation and Removal Procedure (Common section)
Take steps below to install or remove top cover and air duct.
1.4.1 Removal of top cover
Take steps below to remove the top cover.
1.
After the shutdown processing for the CPU blade to be removed, turn off the power of the CPU blade.
2.
Take the CPU blade out from the Blade Enclosure.
Refer to the User's Guide of the Blade Enclosure.
3.
Put the CPU blade on an anti-static sheet with little dust.
4.
Remove the two screws that secure the top cover.
5.
Firmly hold the top cover, move it slightly toward the rear of the CPU blade, then lift the cover to remove it from
the CPU blade.
Important
Pay attention not to make the cover hit any electronic component on the CPU blade.
Express5800/B120d, B110d User's Guide
1. Installing Internal Optional Devices
39
Advertisement
Table of Contents
